| 10 Good reasons to use the patent pend. KIRKSAETER Silverline Inwall speakers: |
  |
1: Get
your speakers and cables out of your room! 2:
Install them in the wall and improve your interior. 3: With
Silverline Inwall you get High End Sound. 4:
KIRKSAETER restore the strength of the wall, it is 5:
Silverline Inwalls are tuned easily after installment. 6:
Silveline cabinet- and inwall models sounds equal. 7: The
wall frame is paintable wood, no plastic. 8: The
textile is easily changed into preferred fabric. 9: The
system parts are templates for easy work |
| And here is how the
installation is easily done on your drywall in your
home: click on drawing to zoom in
 The above drawing
with text shows
the drawing of a drywall. Studs are set up between floor and ceiling.
On both
sides there are ½” thick sheets of drywall fastened to the studs. The
room
between the plates may be filled with isolation material that is taken
out in
the size of the speaker. The speaker cable is mostly placed on the
floor behind
the floor molding and placed by a hole in the wall to the backside of
the wall
up to the speaker. The speaker has screw terminals for correct
connecting
either as 2-channel or as biwiring.
The system that is delivered assembled in its packing box to avoid use of plastic packing material that is hardly able to recycle. Please disassemble it and store the MDF white decoration plate and the white textile frame in the box until the job is done. If you prefer you may repaint the wooden frame in selected color; there is no plastic to worry about. The white textile is fastened with hot glue. By use of a soldering gun it comes off easily and you may glue your own selected textile for perfect colour match to the wall. The baffle is the template for the hole in the wall, the two part fixing frame with assembly pins is the template to place in this hole for drilling the fixing screw holes. These two MDF pieces are screwed to the wall one the inside, the baffle from the outside, and now the wall is more stable than before! Correspondingly, you get rid of wall rattlings and distortions. The bass reproduction is improved by the better stability and you get the High End sound as from the cabinet models. If the air volume of the wall is very large, close one or two bass reflex openings and retune to an infinitive baffle system - that’s all! |
| Inwall
construction consists of 4 parts: Baffle with all drivers, also used as template for the hole: Width x Depth x Height in cm: 18.8 x 1.5 x 29.6 Width x Depth x Height In inch 7 1/2 x 5/8 x 11 5/8” Baffle & fixing frame press the wall by use of threaded screws. 2 part fixing frame for installation on backside of the wall, sizes Width x Depth x Height in cm: 23.6 x 6.6 x 34.5 Width x Depth x Height In inch 9 5/16 x 2 5/8 x 13 9/16 MDF White decoration frame, may be repainted as needed: Width x Depth x Height in cm: 24.4 x 1.0 x 34.7 Width x Depth x Height In inch 9 3/4 x 3/8 x 13 5/8 White textile inner cover frame: textile easy to change. Connection terminal: Screw term, Biwiring option Internal wiring: High End silver plated cable Depth of system is measured including baffle. |
TECHNICAL
DATA SILVER LINE
60 INWALL Type of
speaker:
Mini bookshelf - Satellite Music peak power: 120 Watts peak Music impulse power: 80 Watts peak to peak Continuous power rating, DIN: 45 Watts Efficiency 1 Watt, 1 Meter 88 dB Frequency response: 45 - 25 000 Hz Recommended amplifier: 20 - 40 Watts Crossover Frequencies: 3.500 Hz, 2-ways, double Impedance: 4 - 8 Ohms Woofer, long excursion: 5 cm coated fiber cone Midrange: none Tweeter: 25 mm soft metal Dome Weight net 3.5 kg, 8 Lbs |
Download
PDF version of this data sheet here
